The RAM-B-108BU-HUM1 consists of a 1″ diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU-HUM1 accommodates rails from 1.0″ to a maximum of 2.1″ in diameter. To mount the RAM-B-108BU-HUM1 base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108BU-HUM1 is an alternative mounting base for Beechcraft airplanes with a “throw over yoke”.
1″ to 2.1″
Included in Kit:
(1) QTY 8″ long metal strap
(1) QTY 5.5″ rubber strip that supports the metal straps to avoiding scratching or marking of the rail